Remote Tuning
Calibrated By Us,
Wherever You Are
Professional calibration for MoTeC, Syvecs, Link, and ECU Master, delivered remotely. Send us your logs and we'll refine your map until it's dialed in.
Supported ECUs
MoTeCSyvecsLink ECUECU Master
Process
How Remote Tuning Works
01
Book Your Tune
Choose your engine, ECU, and add-ons in the shop, then read the Remote Tuning Guide in full.
02
Startup Cal Sheet
Fill out the Startup Calibration Sheet: engine, sensors, injectors, wiring outputs, and vehicle setup.
03
Base Calibration
We build and send your base calibration with instructions for your first data logs.
04
Log And Revise
You send logs, we send a revised calibration. Repeat until complete. Typical response is 24 to 48 business hours.
Book A Tune
Choose Your Engine
Pick your engine and ECU, add the functions you need, and we'll take it from there.
Shop Remote Tuning →
Single-Fuel Tune
Included In Every Tune
WOT tuning at one boost level
Cruise fueling
Ignition timing
Knock control setup
Cold start
Idle control
Decel fuel cutoff
Basic engine protection
Lean AFR safety
Fuel pressure loss safety*
*Requires a fuel pressure sensor.
Configure
Optional Add-Ons
Flex fuel
Multiple boost levels
Boost by gear
Launch control / anti-lag
Other motorsport functions
Features vary by ECU software. Add-on pricing is confirmed for your setup before tuning begins.
$50 Each
Tuning Credits
For changes after your calibration is complete. Tell us what's changed and we'll quote the number of credits to cover the work. A turbo upgrade might be 3 credits; a turbo, injectors, and drive-by-wire might be 7. You only pay for the scope you need.
Buy Tuning Credits
90 DaysCredits are valid from the date of purchase.
60 DaysInitial tune window, with revisions included until your calibration is complete.
24–48 HrsTypical response time, in business hours.
No RefundsTuning credits are non-refundable.
Before You Book
What You'll Need
Tuning won't fix mechanical or wiring issues. Your car must be in good condition before we start. The Remote Tuning Guide covers setup, logging, and email workflow in full.
Read The Remote Tuning Guide
01Supported Standalone ECUA supported standalone ECU from MoTeC, Syvecs, Link ECU, or ECU Master. Factory ECUs are not supported.
02Vehicle ConditionA mechanically and electrically sound vehicle with stable fuel pressure, reliable power and grounds, and no exhaust, vacuum, or boost leaks.
03Wideband Oxygen SensorA properly installed and calibrated wideband oxygen sensor capable of providing accurate air-fuel ratio data, free from exhaust leaks or wiring faults.
04Laptop & ECU SoftwareA laptop with the appropriate ECU software installed and configured for datalogging and calibration updates. Internet access is not required while logging.
05Complete Vehicle InformationAn accurately completed Startup Calibration Sheet detailing your engine, fuel system, sensors, and other relevant modifications. This information is essential for developing a safe and accurate starting calibration.